 |
| |
 |
1970 Buick Skylark / GS Exhaust System
The 1970 Buick Skylark / GS Exhaust system kit has been reproduced from original pipes and original drawings. The standard exhaust system used 2 1/4" head pipes and 2" tail pipes. Our system comes as a kit with the correct size headpipes with correct flats, correct flanges, correct size mufflers logo deleted and correct tail pipes with angle cut. All the correct hangers, clamps and screws for ease of installation are included as well as installation instrucstions and diagrams. Strap clamps and retainers are available to the purist who has to have it the way it left the General
Ask about our performance package for our customers who are lucky enough to have the big old ground pounding 455
|
|
| |
|
1969 - 1970 Buick GS Performance Kit |
|
|
| |
1970 Buick GS Stage 1 Convertible Restored By JC Auto Equipped With Gardner Exhaust Performance System
|
| |
|
|
 |
| Ted Nagel's 1970 Buick GS Stage 1 Restored by Jim Weis and Tri Shield Performance Equipped With Gardner Exhaust |
|
|
1970 Buick Assembly Manual Drawings
These drawings are taken from a factory assembly manual. By clicking the diagram you will be able to see what the factory system will look like once installed.
|
 |
|
| " |
GM A Body Front Hanger
These hangers are correct for 1964-1972 GM A-Body Exhaust Systems They come standard with any of our GM A Body reproduction exhaus systems. We offer them zinc plated built with corded rubbers to simulate the original bias tire rubbers.
|
 |
1964 - 1969 GM A - Body Tail Pipe Hangers:
These hangers are a reproduction of the orginal hangers used on a good portion of the GM A - Body Muscle Cars. These are our handbuilt hangers with corded rubbers and our reproduction button head rivets and are for those who have to have it just the way the car came from the factory. The hangers pictured here are a Gardner Exhaust Exclusive Reproduction. A similar hanger comes standard with our kits along with the correct screws pictured here.
|
 |
|
| |
1964 - 1972 GM A - Body Retainer
These retainers were used on the GM A - Body Muscle cars on the muffler hangers. The attaching screw first went through this reatiner and then through the rubber. The reatainer functioned as a washer to protect the rubber on the hanger. Our retainers have been reproduced from the orginal in the picture and come zinc plated. They are a Gardner EXhaust exclusive reproduction and come standard with our concours show pkg. or can be optioned for with one of our entire systems.
|
 |
|
| |
1964 - 1972 GM 2" Strap Clamp
This strap clamp was used on many of the GM - A Body Muscle Cars. It was used to attach the tail pipes to the tail pipe hangers. Our strap clamps have been reproduced from an original and come zinc plated with the correct sheet metal screw. They come standard with our concours show pkg. or can be optioned with one of our entire systems.
|
 |
|
|
