1965 Buick Skylark / GS Exhaust System

The 1965 – 1966 Buick Skylark / GS Exhaust system kit has been reproduced from original pipes and original drawings. This particular exhaust system used 2 1/4″ head pipes and 2″ tail pipes. Our system comes as a kit with the correct size head pipes with correct flats, correct flanges, correct size mufflers logo deleted and correct tail pipes with angle cut. All the correct hangers, clamps and screws for ease of installation are included as well as installation instructions and diagrams.

Ask about our turbo mufflers for a little extra roar!

1965 Buick GS Performance Kit With 2 1/4″ Tail Pipes

GM A Body Front Hanger

These hangers are correct for 1964 -1972 GM A-Body Exhaust Systems They come standard with any of our GM A Body reproduction exhaust systems. We offer them zinc plated built with corded rubbers to simulate the original bias ply tire rubbers.

1964 - 1969 GM A - Body Tail Pipe Hangers:

These hangers are a reproduction of the orginal hangers used on a good portion of the GM A - Body Muscle Cars. These are our handbuilt hangers with corded rubbers and our reproduction button head rivets and are for those who have to have it just the way the car came from the factory. The hangers pictured here are a Gardner Exhaust Exclusive Reproduction. A similar hanger comes standard with our kits along with the correct screws pictured here.

GM A - Body Retainer

These retainers were used on the GM A - Body Muscle cars on the muffler hangers. The attaching screw first went through this reatiner and then through the rubber. The reatainer functioned as a washer to protect the rubber on the hanger. Our retainers have been reproduced from the orginal in the picture and come zinc plated. They are a Gardner EXhaust exclusive reproduction and come standard with our concours show pkg. or can be optioned for with one of our entire systems.

1964 - 1972 GM 2" Strap Clamp

This strap clamp was used on many of the GM - A Body Muscle Cars. It was used to attach the tail pipes to the tail pipe hangers. Our strap clamps have been reproduced from an original and come zinc plated with the correct sheet metal screw. They come standard with our concours show pkg. or can be optioned with one of our entire systems.

GM Style Clamp

This is the correct style clamp used on the 1965 - 1972 GM A body cars. They are available in multiple sizes and come either raw steel or zinc plated when our concours show pkg. is ordered.

Sealant

Originally a clear silicon sealant was used in all the joint to joint connections on most exhaust systems. This was referred to as "grease" in the assembly manual but it was a clear sealant like the one pictured here. After analyzing original samples off our pipes and searching incessantly we came up with a match with the sealant pictured here. This sealant comes as part of any Gardner Exhaust Kit