1969 Grand Prix Std. Duty Automatic Exhaust System

The 1969 Grand Prix Std. Duty automatic cars came with 2″ head pipes and 2 1/4″ tail pipes with resonators. Our Grand Prix exhaust system has been reproduced from our original pipes and comes with correct head pipes, correct flanges correct mufflers, correct tail pipes, correct resonators gm clamps, reproduction muffler and tail hangers, installation instructions, diagrams and sealant. A concourse show package is available for the person when original is not good enough.

Ask about our Turbo Mufflers for those who want the system to look original but just have to have a little more noise!

1969 Gran Prix Std. Duty Automatic Transmission Exhaust System

1968 1972 GTO Muffler Hangers

1968 - 1972 GTO's hangers originally had a small bulge to correspond to the bulge in the clamps that Pontiac used during the day. These clamps and hangers are an exclusive Gardner Exhaust reproduction and will put your GTO over the top in exhaust restoration correctness. The hanger pictured here comes zinc plated, and hand built with corded rubbers and button head rivets to simulate the original and are availble with any of our 1968 - 1972 GTO exhaust systems.

1966 - 1972 GTO Round Bottom Clamp

These clamps are absolutely correct for any 1966 to 1972 GTO restoration. There has never been a high quality reproduction of this clamp or the hanger above that corresponds to it. These clamps are a Gardner Exhaust exclusive reproduction they come zinc plated and are available with any of our Pontiac exhaust systems

1964 - 1969 GM A - Body Tail Pipe Hangers:

These hangers are a reproduction of the orginal hangers used on a good portion of the GM A - Body Muscle Cars. These are our handbuilt hangers with corded rubbers and our reproduction button head rivets and are for those who have to have it just the way the car came from the factory. The hangers pictured here are a Gardner Exhaust Exclusive Reproduction. A similar hanger comes standard with our kits along with the correct screws pictured here.

1967 - 1969 GM 2 1/4 " Strap Clamp

This strap clamp was used on many of the GM - A Body Muscle Cars. It was used to attach the tail pipes to the tail pipe hangers and on the 1969 manual ttransmission GTO's to attach the tips to the tail pipes as well. Our strap clamps have been reproduced from an original and come zinc plated with the correct sheet metal screw. They come standard with our concours show pkg. or can be optioned with one of our entire systems.

1964 - 1972 GM A - Body Retainer

These retainers were used on the GM A - Body Muscle cars on the muffler hangers. The attaching screw first went through this reatiner and then through the rubber. The reatainer functioned as a washer to protect the rubber on the hanger. Our retainers have been reproduced from the orginal in the picture and come zinc plated. They are a Gardner EXhaust exclusive reproduction and come standard with our concours show pkg. or can be optioned for with one of our entire systems.