1967 Hemi GTX Exhaust System
The 1967 Model year brought us the 1 very bad ass muscle car in the Hemi GTX. This exhaust system consisted of a 2 1/2″ H-Pipe and 2 1/4″ tail pipes. Our reproduction system comes with the correct 2 1/2″ H – Pipe with correct flats for the torsion bar, correct welded on heat nipple, correct welded in cross over pipe, correct flanges our H – Pipe necks down to 2 1/ 4″ where it goes into the muffler because that is the way it was done. Our 440 system used the same tail pipes and components however, the 440 H – pipe uses welded on flanges and had flats in the bottom as well as a flat on the left hand side for the torsion bar. Both kits come with the correct hemi style mufflers with correct flats, non decor tail pipe with correct angle cut and weep hole, or GTX tail pipes swaged to accept GTX tip. Rounded bottom style mopar clamps, correct double loop muffler hangers, and tail pipe hanger, installation instructions diagrams and sealant are also included. Ask about our concourse muffler hangers and show package for the guy who wants to compete on the show circuit. GTX tail hangers are available as an option.
1967 Hemi GTX Exhaust System