1965 Nova Exhaust System

The 1965 Nova dual exhaust system consisted of 2 1/2″ head pipes that necked down to 2″ at he manifold, 2″ tail pipes with resonators and offset inlet and outlet mufflers. Our system comes reproduced from an original system from a low mileage car, and consists of the following. Correct 2 1/2″ head pipes with correct wrinkle bends and flats, extensions, donuts, correct 2″ tail pipes although we do leave the resonators off as we have not found a suitable reproduction. We include the correct offset inlet and outlet mufflers, GM style clamps, Chevy small block flanges, installation instructions, diagrams and sealant. reproduction hangers are available as well as a concourse show kit for those of us where original is not good enough.

1966 Nova Exhaust System

1965 Nova Resonator Adapter Kit

1965 - 1967 Nova Muffler Front Hanger:

These hangers are another reproduction that are essential on any high quality Nova restortion. Our hangers are zinc plated and hand built with the correct corded tire rubber. They have been reproduced from the original you see here and will ome with the correct screws and correct 5 /16 ubolts. We are pleased to offer them with our 1965 -67 Nova exhaust systems.

1965 - 1966 Nova Dual Exhaust Hangers:

These hangers are another exlclusive Gardner Exhaust Repprouduction for the Nova community. After seeing what was currently available and knowing that it just was not close enough to original for our customer set we decided to reproduce them. The hangers pictured here are copied from the orginals above they come zinc plated built with the correct corded rubbers, button head rivets as well as the corect screws for attachment. They are available with any of our 1965 - 1966 Nova exhaust systems.

1965 - 1966 Nova Resonator

Although this is not our reproduction, we have compared it to original resonators and it is an excellent reproduction cosmetically of an original piece. This is just a shell but externally it looks spot on. We have developed a resonator adapter kit to work with our exhaust system and these resonators for any of our 1965 - 1966 Nova dual exhaust systems.

1964 - 1972 GM 2" Strap Clamp

This strap clamp was used on many of the GM - A Body Muscle Cars. It was used to attach the tail pipes to the tail pipe hangers. Our strap clamps have been reproduced from an original and come zinc plated with the correct sheet metal screw. They come standard with our concours show pkg. or can be optioned with one of our entire systems.

Extensions and Gaskets

These are the correct Chevy extensions and donut gaskets that were used in the head pipes of every chevy from 1957 up until 1972. They come as part of any Gardner Exhaust Chevy Kit

1957 - 1974 Chevy Small Block Heat Riser

This is the correct Heat Riser for the 1964 - 1974 Chevy Small Blocks. It is an option with any of our Chevy systems and comes with the correct gasket.

Stud Kit

This is the correct stud kit for the 1957-1972 Chevys. This stud kit has the correct dog point on the studs and uses the correct stove nuts as original. This kit is available with any of our Chevy systems.

Sealant

Originally a clear silicon sealant was used in all the joint to joint connections on most exhaust systems. This was referred to as "grease" in the assembly manual but it was a clear sealant like the one pictured here. After analyzing original samples off our pipes and searching incessantly we came up with a match with the sealant pictured here. This sealant comes as part of any Gardner Exhaust Kit